Alcon Equipped Atoms! The CL Brakes RC6 compounds will help you focus more on having fun at the track thanks to  an innovative sintered, all-metal pad material. Virtually no break-in or bedding procedure, nearly flat torque curve and extended life means you spend more time behind the wheel and less time worrying about your brakes. Perfect for AutoX & timed hot laps! Perfered by 3 out of 4 drivers in on track comparison test.

Sintered Metal Material = Hassle-Free  & High Performing

• Virtually no break-in or bed-in procedure.

  • Only a few moderate stops after install will achieve maximum performance.

• No warm up needed!

  • Sintered material has higher coefficient of friction when hot or cold vs competing semi-metallic, organic or ceramic compounds.

  • Near maximum bite on first AutoX run or timed hot lap.

• Fade resistant to over 1200 degreesF.

  • Almost impossible to achieve in a Lotus/Ariel.

• Firm pedal feel and easily modulated.

  • High density material will not compress.

• Much less pad transfer than other pads

  • Thin graphite transfer layer is consistent, repeatable and self-cleaning.

  • No vibrations, judder or rotor damage.

• High metal content is extremely wear resistant.

  • 2 to 3x more laps vs. other pad materials and types.

Model Compatibility & Order Guide

• Atom Alcons = Ariel Atom Alcon Race Brakes

Price is per axle set

*If you wash your car with these pads installed, dry them off by driving around the block a few times to heat them up.  Moisture left on these pads may cause them to rust to the rotors which could result in separation from the backing plate.