Only Atom Alcon Fronts are available.  

A User Friendly, yet Street-able Pad! Though CL pads are considered a mild race brakes, the RC5+ compound can be used as aggressive street pad thanks to an innovative sintered, all-metal pad material. Virtually no break-in or bedding procedure, nearly-flat torque curve, low dust & noise and extended life means you get to focus on having fun blasting through the canyons or on the occasional track day! 

Sintered Metal Material = Hassle-Free & High-Performing

• Virtually no break-in or bed-in procedure.

  • Only a few moderate stops after install will achieve maximum performance.

• No warm up needed!

  • Sintered material has higher coefficient of friction when hot or cold vs competing semi-metallic, organic or ceramic compounds.

  • Near maximum bite on a cold morning or after a long highway stint.

• Fade resistant to over 1200 degreesF.

  • Almost impossible to achieve in a Lotus/Ariel on or off the track.

• Firm pedal feel and easily modulated.

  • High density material will not compress.

• Much less pad transfer than other pads

  • Thin graphite transfer layer is consistent, repeatable and self-cleaning.

  • No vibrations, judder or rotor damage.

• High metal content is extremely wear resistant.

• Moderate noise.

• Moderate dust.

Model Compatibility & Order Guide

• Atom Alcons = Ariel Atom Alcon Race Brakes

Price is per axle set

*If you wash your car with these pads installed, dry them off by driving around the block a few times to heat them up.  Moisture left on these pads may cause them to rust to the rotors which could result in separation from the backing plate.